Nocorro

Using INOX®

Automotive

inox_logo



The major qualities that make INOX lubricant an excellent product for the automotive industry are:

• It is silicone-free, acid-free and does not contain any acid or petrol derivatives; it is therefore safe to use on electronic systems and painted surfaces.
• It does not dry out or wash off with water. It has high penetrating and lubricating abilities with a very good anti-corrosion power.
• It is non-conductive (without being an insulator) and non-corrosive.


AUTO ELECTRICS:

INOX is a highly effective anti-corrosion and anti-moisture product to protect, penetrate and lubricate electrical fittings and systems (lights and switches, etc.) coils, plugs, distributors, cable joints and connectors.
INOX is the ideal lubricant for repairing motors, generators, alternators and windshield wiper systems, etc.

DOORS AND LOCKS:
Spray INOX into locks and locking mechanisms to stop them from freezing or squeaking.
Using a cloth, apply INOX on the door handles or seals to stop them from freezing shut.

BODY SHOPS:
INOX is a good penetrating oil for loosening screws, bolts and suspension and steering systems.
INOX does not affect the paint.

MECHANICAL REPAIRS:
INOX is the ideal lubricant for door hinges and locks as it stops them from squeaking for months or even years.
INOX lubricates motorbike chains and steering cables etc. It is an excellent penetrant to help remove exhaust clamps.

ENGINE BLOCK:
INOX protects against corrosion and moisture, can be sprayed on camshafts and crankshafts and directly onto engine blocks.
An engine lubricant uniting protection, utility and ease into a single product.

FUEL INJECTORS AND CARBURETTORS:
INOX eases the movement of injector heads, preventing corrosion from taking seat.
INOX maintains the carburettor system in good condition, in addition to the accelerator cables.

GENERAL:
INOX is also an internal and external plastics reviver.

•    Using a clean cloth, apply the product onto the dashboard or use INOX to wax the car body or dissolve tar marks (spray and leave to work for 5 minutes before wiping).
•    Clean the plastics with INOX, which will no longer fade under UV rays
•    Spray INOX directly onto the front of the car (bonnet, skirts, etc.) to avoid squashed insects from sticking the car.
•    A simple rinse is then sufficient to clean them off.

CAUTION: INOX MAY AFFECT SOME NATURAL RUBBER PRODUCTS IN THE EVENT OF LONG-TERM USE (perform a prior test)