ELECTRICITY

SWITCHES, PLUGS AND ELECTRICAL FITTINGS:
Use the INOX lubricant to prevent corrosion and protect switches, light fittings, plugs, terminal blocks and electrical fittings.
INOX protects them and maintains them in good working order for two years.
Spray INOX onto electrical terminal block screws to stop corrosion and ease unscrewing operations.
Use INOX to protect all refrigeration circuits, electric junction blocks and all electrical equipment subject to marine conditions against moisture and corrosion.
INOX prevents short-circuits and electric arcing.

RELAYS, SOLENOIDS AND REGULATORS:
Use INOX to lubricate and protect relays, solenoids, regulator and circuit coils, contacts and pivots from corrosion. With regard to cold room equipment, works performed in refrigerated environments, slaughterhouses, etc., INOX is very effective at stopping condensation from occurring on parts.
INOX avoids short circuits and damage caused by moisture and corrosion.

MOTORS, GENERATORS AND CONTROL PANELS:
INOX can be safely sprayed onto ventilations and engine and generator housings to protect them from moisture and corrosion.
INOX lubricates transmission shafts, fastening axles and ball bearings to prevent squeaking and seizing.
To protect against moisture and corrosion caused by condensation, spray INOX directly onto cold room fan motors and air extractor fans used in high moisture areas.
Use INOX on control panel circuits as a preventive measure against moisture and corrosion, to keep power relays and solenoids in good working order.

CAUTION: INOX can be safely used on direct and alternating, high voltage and low voltage current. However, when using INOX in aerosol form on a high voltage circuit, please wait two or three minutes for the combustible gas to dissipate before switching on the electric current. This procedure is not required for INOX in its liquid form.
INOX can be easily removed with mineral-based solvents.

ELECTRONICS

CIRCUITS, DIFFERENT PINS, PLUGS AND KEYBOARDS:
Use INOX to clean your computing equipment (use a clean cloth to apply INOX).
Spray INOX into sockets to protect them from corrosion and electrolysis caused by condensation.
INOX protects circuits from moisture and corrosion and stops electrolysis.

CAUTION: Do not use INOX on recording heads.

MICRO-SOCKETS, VARIABLE CAPACITORS and VALVES:
INOX cancels the static effect caused by condensation and corrosion within variable capacitors (allow up to 48 hours to take effect).
INOX protects potentiometers and micro-switches and makes them fully functional.
INOX stops electrolysis and corrosion from occurring on contact valves and eases assembly and disassembly operations.

TESTIMONIAL
MELBOURNE: THE WIRELESS AND SOUND MUSEUM:
"We use the INOX product as part of our restoration programme for antique mechanical and electronic equipment. We have found that this product provides the best protection to electrical wiring fittings, tuning capacitors, power transformers, loud speakers and housings.
As this product is non-conductive and does not bond or stain, we use it to stop the electrolysis phenomenon from taking place on copper windings. In one of our experiments, the insulation paper deteriorates and untreatable acid is produced between the copper windings, which destroys the device. As these components are no longer manufactured, we rely heavily on the protective properties of INOX.
After testing a whole range of penetrating, anti-corrosion and lubricating products, we now use INOX exclusively for all restoration works undertaken by this department".

Chief Engineer – Restoration Department-

TELEPHONE SYSTEMS:
The INOX lubricant prevents electrolysis from taking place between aluminium and stainless steel.
INOX protects fibre optic connectors from corrosion and moisture.
INOX protects relays, contacts, circuits, telephone handset wires and switches from moisture and corrosion.

RADIOS, TELEVISIONS AND ANTENNAS:
In high moisture and coastal areas, INOX protects radio and television receiver circuits from moisture and corrosion.
INOX protects all marine electronic equipment from electrolysis and corrosion caused by sea salt and condensation.
Use INOX to protect TV antenna cables and satellite receivers from corrosion.

THE INOX LUBRICANT CAN BE USED TO PROTECT AGAINST ELECTROLYSIS, CORROSION AND CONDENSATION FOR ALL ELECTRICAL AND ELECTRONIC CIRCUITS IN ADDITION TO FOR ALL EQUIPMENT PARTS.

CAUTION: INOX MAY AFFECT SOME NATURAL RUBBER PRODUCTS IN THE EVENT OF LONG-TERM USE (perform a prior test)